The Most Affordable LAB30 Extruder is ONLY USD14000

To celebrate 12 years’ foundation of our company, LAB30 Economic Model is on promotion with limited quantity of 88 sets. It is able to handle various common recipes, with price range from USD14000 to 18000 (based on different configurations).

Of cause we still supply high torque model LAB30 extruder for some special compounding.

Both of them can be used to stimulate the continuous extrusion process for batch samples, new material research, new process development and small quantity production.

Promotion End Date: 2019-12-31

Economic Model

Lab Extruder Economic Model

It is designed for the recipes with low bulk density and less power consumption, such as color/filler additive and some additives masterbatch etc.

With the best price in the market.
With traditional touching screen.

High Torque Model

Lab Extruder High Torque Model

It is designed for the recipes which need high torque and higher temperature, such as PA66 compounding with 40% glass fiber, PC/ABS alloy etc.

The material of screw and barrel are good for wear-resistance.
Clutch with torque limit for protecting the gearbox if overloading.
With Intelligent control system.

Delivery Scope and Price

ModelEconomic modelHigh Torque Model
Screw Diameter / mm3030
Max. Screw Speed / rpm600800
Length of Screw / L/D40 – 4440 – 48
Screw Material38CrMoAlAW6Mo5Cr4V2
Barrel material38CrMoAlA45# + complete linear Cr26MoV
Heater of barrelInfraredCasting Copper
Main Motor / kW7.5 – 1118.5 – 30
Gearbox Specific Torque Nm/cm36.813
ClutchStandard with 6 nylon pinsTorque limiter from German
Control SystemSCIYON inverter + HMISCIYON inverter + Industrial PC
Pelletizing SystemWater cooling strand pelletizing without classifierWater cooling strand pelletizing with classifier
Output kg/hr20 – 3525 – 70
ApplicationColor masterbatch
Filler masterbatch
Additives masterbatch
Cable compounding
Engineering plastic reinforce:
PA66 + 40% GF
PC/ABS alloy
TPE/TPR
Price — FOB Nanjing in USD14,000 -18,00027,000 – 33,000